Performance monitoring

If napari is not performing well, you can use napari.utils.perf to help diagnose the problem.

The module can do several things:

1. Time Qt Events

2. Display a dockable performance widget.

3. Write JSON trace files viewable with chrome://tracing.

4. Time any function that you specify in the config file.

Monitoring vs. profiling

Profiling is similar to performance monitoring. However profiling usually involves running an external tool to acquire timing data on every function in the program. Sometimes this will cause the program to run so slowly it’s hard to use the program interactively.

Performance monitoring does not require running a separate tool to collect the timing information, however we do use Chrome to view the trace files. With performance monitoring napari can run at close to full speed in many cases. This document discusses only napari’s performance monitoring features. Profiling napari might be useful as well, but it is not discussed here.

Enabling perfmon

There are two ways to enable performance monitoring. Set the environment variable NAPARI_PERFMON=1 or set NAPARI_PERFMON to the path of a JSON configuration file, for example NAPARI_PERFMON=/tmp/perfmon.json.

Note

Note: when using NAPARI_PERFMON, napari must create the Qt Application. If you are using NAPARI_PERFMON=1 ipython, do not use %gui qt before creating a napari Viewer.

Setting NAPARI_PERFMON=1 does three things:

1. Times Qt Events

2. Shows the dockable performance widget.

3. Reveals the Debug menu which you can use to create a trace file.

Configuration file format

Example configuration file:

{
    "trace_qt_events": true,
    "trace_file_on_start": "/tmp/latest.json",
    "trace_callables": [
        "chunk_loader"
    ],
    "callable_lists": {
        "chunk_loader": [
            "napari.components.chunk._loader.ChunkLoader.load_chunk",
            "napari.components.chunk._loader.ChunkLoader._done"
        ]
    }
}

Configuration options

trace_qt_events

If true perfmon will time the duration of all Qt Events. You might want to turn this off if the overhead is noticeable, or if you want your trace file to be less cluttered.

trace_file_on_start

If a path is given, napari will start tracing immediately on start. In many cases this is much more convenient than using the Debug Menu. Be sure to exit napari using the Quit command. The trace file will be written on exit.

trace_callables

Specify which callable_lists you want to trace. You can have many callable_lists defined, but this setting says which should be traced.

callable_lists

These lists can be referenced by the callable_lists option. You might want multiple lists so they can be enabled separately.

Trace file

The trace file that napari produces is viewable in Chrome. Go to the special URL chrome://tracing. Use the Load button inside the Chrome window, or just drag-n-drop your JSON trace file into the Chrome window. You can also view trace files using the Speedscope website. It is similar to chrome://tracing but has some different features.

The trace file format is specified in the Trace File Format Google Doc. The format is well-documented, but there are no pictures so it’s not always clear how a given feature actually looks in the Chrome Tracing GUI.

Example investigation

This is an example showing how you might use the napari.utils.perf module.

Add a sleep

To simulate a performance problem in napari, add a sleep() call to the Labels.paint method, this will make the method take at least 100 ms:

def paint(self, coord, new_label, refresh=True):
    import time
    time.sleep(0.1)

    if refresh is True:
        self._save_history()

Create a perfmon config file

Create a minimal perfmon config file /tmp/perfmon.json that looks like this:

{
    "trace_qt_events": true,
    "trace_file_on_start": "/tmp/latest.json",
    "trace_callables": []
}

This will write /tmp/latest.json every time we run napari. This file is only written on exit, and you must exit with the Quit commmand. Using trace_file_on_start is often easier than manually starting a trace using the Debug menu.

Run napari

Now run napari’s add_labels example like this:

    NAPARI_PERFMON=/tmp/perfmon.json python examples/add_labels.py

Use the paint tool and single-click once or twice on the labels layer. Look at the performance widget, it should show that some events took over 100ms. The performance widget is just to give you a quick idea of what is running slow:

The trace file will give you much more information than the performance widget. Exit napari using the Quit command so that it writes the trace file on exit.

View trace in Chrome

Run Chrome and go to the URL chrome://tracing. Drag and drop /tmp/latest.json into the Chrome window, or use the Load button to load the JSON file. You will usually need to pan and zoom the trace to explore it, to figure out what is going on.

You can navigate with the mouse, but using the keyboard might be easier. Press the AD keys to move left and right, and press the WS keys to zoom in or out. Both the MouseButtonPress and MouseMove events are slow. In the lower pane the Wall Duration field says it took over 100ms:

So we can see that some events are running slow. The next questions is why are MouseButtonPress and MouseMove running slow? To answer this question we can add more timers. In this case we know the answer, but often you will have to guess or experiment. You might add some timers and then find out they actually run fast, so you can remove them.

Add paint method

To add the Labels.paint method to the trace, create a new list of callables named labels and put the Labels.paint method into that list.

{
    "trace_qt_events": true,
    "trace_file_on_start": "/tmp/latest.json",
    "trace_callables": [
        "labels"
    ],
    "callable_lists": {
        "labels": [
            "napari.layers.labels.Labels.paint"
        ]
    }
}

Create the new trace File

Run add_labels as before, click with the paint tool, exit with the Quit command.

View the new trace File

Drop /tmp/latest.json into Chrome again. Now we can see that MouseButtonPress calls Labels.paint and that Labels.paint is really responsible for most of the time. After clicking on the event press the m key, that will highlight the event duration with arrows and print the duration right on the timeline, in this case it says the event took 106.597ms:

When investigating a real problem we might have to add many functions to the config file. It’s best to add timers that take a lot of time. If you add a timer that’s called thousands of times, it will add overhead and will clutter the trace file. In general we want to trace important and interesting functions. If we create a large callable_list we can save it for future use.

Advanced

Experiment with the napari.utils.perf features and you will find your own tricks and techniques.

Create multiple callable_lists and toggle them on or off depending on what you are investigating. The perfmon overhead is low, but tracing only what you care about will yield the best performance and lead to trace files that are easier to understand.

Use the perf_timer context object to time only a block of code, or even a single line, if you don’t want to time an entire function.

Use add_instant_event and add_counter_event to annotate your trace file with additional information beyond just timing events. The add_instant_event function draws a vertical line on the trace in Chrome, to show when something happened like a click. The add_counter_event function creates a bar graph on the trace showing the value of some counter at every point in time. For example you could record the length of a queue, and see the queue grow and shrink over time.

Calls to perf_timer, add_instant_event and add_counter_event should be removed before merging code into main. Think of them like “debug prints”, things you add while investigating a problem, but you do not leave them in the code permanently.

You can save JSON files so that you can compare how things looked before and after your changes.

previous

Napari in Docker

next

In-depth explanations